Before Takeoff

Seat Belts Sign	On	If "Enable seatbelt signs check" option set to true
No Smoke Sign	Auto	If "Enable seatbelt signs check" option set to true
Logo Lights	On	If dark
Transponder	TA/RA or TA	TA if "Set TCAS to TA Only" option set to true, otherwise TA/RA
Weather Radar	On	If "Weather radar mode" option set to 1 (WX), 2 (WX/T), or 3 (MAP)
High Intensity Lights	On
Landing Lights	On L+R
Nose Light	TAXI or LAND	LAND if "Set nose lights to LAND" option set to true, otherwise TAXI
Runway Turnoff Lights	On L+R
Auto Landing Lights	Arm

After Landing

Speed Brakes/Spoilers	Retract	If "Enable speedbrake retraction" option set to true
Flaps	Up	If "Enable flaps retraction" option set to true
High Intensity Lights	Off
Landing Lights	Off L+R
Nose Light	TAXI
Runway Turnoff Lights	Off L+R	If "Turn runway turnoff lights off" option set to true
APU	On
Weather Radar	Off
Transponder	XPNDR
Auto Brake	Off

Auto Landing Lights

• Automatically turn the landing lights and other lights off/on when passing through a certain altitude.
• You must ARM it by clicking on the widget, and it will turn orange. Then, while the airplane crosses the specified altitude, the actions will be triggered accordingly.
• Executing the Before Takeoff widget will arm this automatically. Don't forget to arm it again before descending.
• The altitude reported by MSFS might be different from the one shown on the PFD, so giving some margin is recommended.

	Off (ascending)	On (descending)	Specified by "Lights off/on altitude"
Landing Lights	Off L+R	On L+R
Nose Light	Off	LAND
Runway Turnoff Lights	Off L+R	On L+R
Logo Lights	Off	On	If dark
Seat Belts Sign	No Change	On
Auto Brake	Off	No Change