Before Takeoff

Seat Belts Sign	On	If "Enable seatbelt signs check" option set to true
No Smoking Sign	Auto	If "Enable seatbelt signs check" option set to true
Transponder	TA/RA or TA	TA if "Set TCAS to TA Only" option set to true, otherwise TA/RA
Weather Radar	On
Strobe Lights	On
Wing Lights	On	If "Enable wing lights ON" option set to true or is dark
Nav & Logo Lights	On
Landing Lights	On L+R
Nose Light	T.O.
Runway Turnoff Lights	On
Packs	Off	If "Set packs off" option set to true
Elapsed Timer	Start	If "Start Elapsed Timer" option set to true
Auto Landing Lights	Arm

After Landing

Speed Brakes/Spoilers	Retract	If "Enable speedbrake retraction" option set to true
Flaps	Up	If "Enable flaps retraction" option set to true
Strobe Lights	Auto
Landing Lights	Off L+R
Nose Light	Taxi
Runway Turnoff Lights	Off	If "Turn runway turnoff lights off" option set to true
Wing Lights	Off	If "Turn wing lights off" option set to true
APU	On
Weather Radar	Off
Transponder	STBY
Elapsed Timer	Stop	If "Stop Elapsed Timer" option set to true

Auto Landing Lights

• Automatically turn the landing lights and other lights off/on when passing through a certain altitude.
• You must ARM it by clicking on the widget, and it will turn orange. Then, while the airplane crosses the specified altitude, the actions will be triggered accordingly.
• Executing the Before Takeoff widget will arm this automatically. Don't forget to arm it again before descending.
• The altitude reported by MSFS might be different from the one shown on the PFD, so giving some margin is recommended.

	Off (ascending)	On (descending)	Specified by "Lights off/on altitude"
Landing Lights	Off L+R	On L+R
Nose Light	Off	Taxi
Runway Turnoff Lights	Off	On
Wing Lights	Off	On	If "Enable wing lights ON" option set to true or is dark
Seat Belts Sign	No Change	On