Before Takeoff

Seat Belts Sign	On	If "Enable seatbelt signs check" option set to true
No Device Sign	On	If "Enable seatbelt signs check" option set to true
Gust Lock	Released
Weather Radar	On
Wing Lights	On
Taxi & TO Lights	On
Landing Lights	On L+R
Logo Lights	On	If dark
Strobe Lights	On
Yaw Damper	Arm	If "Automatically engage yaw damper (YD) after takeoff" option set to true
Auto Landing Lights	Arm

After Landing

Chronograph	Start	If "Start chronograph" option set to true
Flaps	Up	If "Enable flaps retraction" option set to true
Gust Lock	Engaged
Weather Radar	STBY
Landing Lights	Off L+R
Taxi & TO Lights	On
Strobe Lights	Off
Probe Heats	Off CPT+FO+STBY

Auto Landing Lights

• Automatically turn the landing lights and other lights off/on when passing through a certain altitude.
• You must ARM it by clicking on the widget, and it will turn orange. Then, while the airplane crosses the specified altitude, the actions will be triggered accordingly.
• Executing the Before Takeoff widget will arm this automatically. Don't forget to arm it again before descending.
• The altitude reported by MSFS might be different from the one shown on the PFD, so giving some margin is recommended.

	Off (ascending)	On (descending)	Specified by "Lights off/on altitude"
Landing Lights	Off L+R	On L+R
Taxi & TO Lights	Off	On
Wing Lights	Off	On
Logo Lights	Off	On	If dark
Seat Belts Sign	No Change	On
No Device Sign	No Change	On

Set Altitude

• The widget shows the current MCP altitude.
• Scroll on the widget to change the MCP altitude.
• Use OTTO to set (and intervene) the altitude to a value. Some example commands would be "alt 3000", "fl 320", "fl 200 intv", "alt intv", etc.

Set Minimums

• Scroll on the widget to change the minimums value.
• Use OTTO to set the minimums to a value. Some example commands would be "mins 200", "baro 360", "radio 200", "mda 240", etc.